Advertisement
8
innogy eBox smart (IEIA-601) • innogy eBox smart RFID (IEIA-602)
Operation for charging
an electric vehicle
Prerequisite for charging with the innogy eBox smart (RFID) is the activation of
a vehicle on the innogy eBox smart (RFID). The user of the innogy eBox smart
(RFID) can avail of the operating modes described below.
I. Authentication-free charging
1. Connect the charging cable to the innogy
eBox smart (RFID) and the vehicle.
2. The innogy eBox smart (RFID) recognizes the
pilot signal.
3. The plug locks following successful communi-
cation of the pilot signal. Charging activated,
voltage applied and the blue LED lights up.
4. The blue LED switches off when charging is
completed. The green LED on the eBox smart
(RFID) fl ashes when charging is completed but
the cable is still connected. Note: Charging is
not terminated automatically.
5. Disconnect the charging cable from the
vehicle and charging box (unlock the vehicle
in advance if necessary).
Further authentication procedures in connection
with additional innogy services.
Individual charging authentication procedures
may not be available in some countries..
II. Plug & Charge
The innogy eBox smart (RFID) is equipped with
Plug & Charge technology conforming to ISO
15118. The vehicle must support Plug & Charge
for this purpose. Information on this can be
obtained from the manufacturer of your electric
vehicle:
1. Connect the charging cable to the innogy
eBox smart (RFID) and the vehicle.
2. The vehicle sends an identifi er to the innogy
eBox smart (RFID) that is linked directly to
the innogy ePower electricity contract or
confi gured in the innogy back end.
3. The innogy eBox smart (RFID) legitimizes the ID.
4. The plug locks following successful communi-
cation of the pilot signal. Charging activated,
voltage applied and the blue LED lights up.
5. The blue LED switches off when charging is
completed. The green LED on the eBox smart
(RFID) fl ashes when charging is completed but
the cable is still connected. Note: Charging is
not terminated automatically.
6. Disconnect the charging cable from the
vehicle and charging box (unlock the vehicle
in advance if necessary).
Hide quick links:
Advertisement
