BKI BLF-FC Installation & Operation Manual page 35

Electric Autolift Fryer
To refill the pot through the rinse hose, use the steps below:
•
Make certain that the rinse hose is connected to rinse hose connector.
•
Holding the hose by the handle, place hose nozzle inside the pot.
•
Position the FILL lever in the THRU HOSE position.
•
On the FILTER/OFF/FRY switch, touch the FILTER button and shortening will
automatically pump into the pot.
•
Let the filter continue to pump the shortening until the fill mark in the fryer pot is reached or
until air starts bubbling through the shortening.
•
As soon as air is seen in the shortening, on the FILTER/OFF/FRY switch, touch the OFF
button to prevent shortening degradation.
•
Add new shortening if the fill mark has not been reached.
Filter Pump Reset:
If the filter pump overheats the lights next to FILTER and OFF buttons will alternate back and forth
indicating the pump has tripped.
Once the pump has cooled the light next to the FILTER button will flash indicating the pump is ready to be
reset.
Touch the FILTER button to restart the pump.
32
Maintenance