BKI BLF-FC Installation & Operation Manual page 25

Electric Autolift Fryer
STEP
1 On the FILTER/OFF/FRY switch,
touch to FRY.
2 Press ENTER
3 Press PROG on the keypad.
4 Input 1712 and ENTER.
5 Press ENTER.
6 Press TOGGLE/CLEAR until the
desired option is displayed.
7 Press ENTER.
8 Press TOGGLE/CLEAR until the
desired option is displayed.
9 Press ENTER.
10 Press TOGGLE/CLEAR until the
desired option is displayed.
11 Press ENTER.
12 Press TOGGLE/CLEAR until the
desired option is displayed.
13 Press ENTER.
14 Press TOGGLE/CLEAR and
input the number of fry cycles
you want to complete among all
product programs before
enabling filter lockout.
Table 1. System Programming Procedure
ACTION DISPLAY
Is Fry Pot Full?
YES Press Enter
IDLE
HEAT SET 275°F
PROGRAM CODE
PROGRAM SYSTEM
PROGRAM DEGREES
F
PROGRAM DEGREES
X
PROGRAM APL TYPE
ELECTRIC
PROGRAM APL TYPE
X
PROGRAM MELTCYCL
NO
PROGRAM MELTCYCL
X
PROGRAM ARM IDLE
YES
PROGRAM ARM IDLE
X
PROGRAM GLBLFLTR
PROGRAM GLBLFLTR
X
22
Operation
COMMENTS
This command allows you
to choose the temperature
scale option you want to
use. The display will show
either show F or C.
X refers to the
temperature scale you
have chosen.
This command allows you
to choose the appliance
type you are using. The
display may show
ELECTRIC, GAS OR ALF.
X refers to the appliance
type you have chosen.
This command allows you
to set the melt cycle
option. This is normally set
to yes if you are using
solid shortening. The
display will show either
YES or NO.
X refers to the melt cycle
option chosen.
This command allows you
to set the idle activation
option. The display will
show either YES or NO.
X refers to the arm idle
option chosen.
This command allows you
0 to specify the total number
of fry cycles to complete
among all product
programs before a
message is displayed
reminding you to filter the
shortening (filter lockout).
X refers to the number of
program cycles you want
to complete among all
product programs before
filtering the shortening.