Adjusting Height Of Rea Headrest Or Neckrest; Adjusting The Cheek Supports; Adjusting Elan Headrest - Invacare Fox User Manual

• 5 mm Allen key
1. Loosen the screws A , B or the clamping lever C.
2. Adjust the headrest or neckrest to the required position.
3. Retighten screws and clamping lever.
4. Loosen the Allen screw D.
5. Slide the headrest left or right to the required position.
6. Retighten the Allen screw.

5.9.2 Adjusting Height of Rea Headrest or Neckrest

The adjustment of the height is the same for all Rea
headrests and neckrests.
1577074-F
1. Loosen hand screwA.
2. Adjust headrest or neckrest to required height.
3. Retighten hand screw.

5.9.3 Adjusting the cheek supports

1. Push the cheek supports inward or pull them out to
the required position.

5.10 Adjusting Elan Headrest

The headrest clamp hardware is designed to install into
existing mounting holes in the backrest pan.
Setup
47