Adjusting The Head Light - Invacare Fox User Manual

1. Loosen the hand screw (1).
2. Adjust to required position.
3. Retighten the wing nuts.

5.15 Adjusting the head light

If your mobility device is fitted with optional light, refer to
the user manual of the lights for information about usage.
The light must be used in bad visibility conditions
like darkness or fog.
Before first usage you have to adjust the head light to
prevent safety issues. Adjust the head light so that you are
seen well but do not dazzle other traffic.
Adjusting the head light correctly
1. Adjust the head light straight ahead.
2. Measure distance between middle of head light and
floor A.
3. Mark vertical surface, e.g. a wall, which corresponds to
half of determined value A.
1577074-F
4. Distance between marking B and head light must be
five meters.
5. Adjust middle of light cone to marking B.
Setup
55