National Captivate Series Assembly Instructions

NOTE: The bridge can be attached between a desk and credenza or return. A desk and
credenza are used as examples in this instruction.
Attach mounting brackets to underside
1
of desk and credenza worksurfaces where
they will attach to the bridge worksurface.
Center the brackets with the edge of the
worksurfaces. Attach brackets to desk and
credenza using the provided #10 x 3/4"
panhead screws, four (4) per bracket
(Figure A and Figure B).
Center wood mounting bracket on desk
2
and credenza end panel and attach using
three (3) #8 x 1 1/4" panhead screws
provided (Figure C).
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent. If you
have any questions concerning these instructions, please call National Customer Service.
Figure A
Center brackets
on edge of desk
Desk
Figure B
Center brackets
on edge of credenza
Figure C
Desk
Wood
Mounting
Brackets
C A S E G O O D S
Assembly Instructions
Captivate™ Series
Bridge Assembly
Recommended Tools
• Screw Gun
• Phillips Head Bit
• Level
Credenza
Package Contents
• Bridge
• Modesty Panel
• Mounting Brackets
• Wood Mounting Rails
• #10 x 3/4" Panhead Screws 32
• #8 x 1 1/4" Panhead Screws 12
• #8 x 1 1/2" Panhead Screws
Credenza
Telephone 800.482.1717
Fax 812.482.8800
www.nationalonline.com
Part #2040765
Printed in U.S.A
© 2007 Kimball International, Inc.
Qty.
1
1
4
2
6