6.5 Cable Connection
❶
DO
DI
C
1
C
1
DO
❷
6.5.1 DI/DO TERMINAL CONNECTOR
1). Connect external input/output devices (e.g. alarm device) optionally if they are necessary. Refer to
the reference below for the appropriate connection.
DO (Alarm): It is used for connecting an external device such as relays and LEDs.
Refer to the table below for electrical wiring information:
DO
C
1
Then, the connected device can be activated via its webpage.
12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
Hardware and Installation Manual| VISIX V-Series All-in-One Cameras – Gen I
Function
Ground
Output
Internal
DO
COM
Relay Type
❹
❸
Specifications
0 to 24 VDC
Max load: 50mA
Device
73