Receiving The Memorized Stations - Sony XR-C2300R Operating Instructions Manual

Receiving the memorized
stations
1
Press (SOURCE) repeatedly to select the
tuner.
2
Press (MODE) repeatedly to select the
band.
3
Press the number button ((1) to (6)) on
which the desired station is stored.
Tip
Press either side of (PRST/DISC) to receive the
stations in the order they are stored in the
memory (Preset Search Function).
If you cannot tune in a preset
station
Press either side of (SEEK/AMS) to search
for the station (automatic tuning).
Scanning stops when the unit receives a
station. Press either side of (SEEK/AMS)
repeatedly until the desired station is
received.
Note
If the automatic tuning stops too frequently, press
(MENU), then press either side of (PRST/DISC)
repeatedly until "LOCAL" (local seek mode) is
displayed. Then press + side of
(SEEK/AMS) to select "LOCAL-ON." Press (ENTER).
Only the stations with relatively strong signals will
be tuned in.
Tip
If you know the frequency of the station you want
to listen to, press and hold either side of
(SEEK/AMS) until the desired frequency appears
(manual tuning).
10 10
If FM stereo reception is poor
— Monaural Mode
1
During radio reception, press (MENU),
then press either side of (PRST/DISC)
repeatedly until "MONO" appears.
2
Press + side of (SEEK/AMS) until "MONO-
ON" appears.
The sound improves, but becomes
monaural ("ST" disappears).
3
Press (ENTER).
To return to normal mode, select "MONO-
OFF" in step 2 above.
Changing the display item
Each time you press (DSPL/PTY), the item
changes as follows:
Frequency (Station Name)* y Programme type
* When you tune in an FM station that transmits
RDS data, the station name appears.
After you select the desired item, the display
will automatically change to the Motion
Display mode after a few seconds.
In the Motion Display mode, all the above
items are scrolled in the display one by one in
order.
Tip
The Motion Display mode can be turned off. (See
"Changing the sound and display settings" on
page 16).