Memorizing Only The Desired Stations; Receiving The Memorized Stations - Sony XR-T200 Operating Instructions Manual

Memorizing only the
desired stations
Up to 6 stations on each band (FM1, FM2, FM3,
MW, SW1 and SW2) can be stored on the
preset number buttons in the order of your
choice. Therefore, 18 FM stations can be
memorized.
If you try to store another station on the same
preset number button, the previously stored
station will be erased.
1
Press (SOURCE) repeatedly to select the
tuner.
2
Press (MODE) repeatedly to select the
band.
3
Press (SEEK/AMS) to search for the
station you wish to store on a preset
number button.
EN
4
Press the desired preset number button
((1) to (6)) for two seconds.
The number of the selected preset number
button appears on the display.
6
Receiving the memorized
stations
1
Press (SOURCE) repeatedly to select the
tuner.
2
Press (MODE) repeatedly to select the
band.
3
Press the preset number button ((1) to
(6)) momentarily on which the desired
station is stored.
Changing the displayed items
Each time you press (DSPL), the display
changes between the frequency and the clock.
If you cannot tune in a preset
station
Press either side of (SEEK/AMS)
momentarily to search for the station
(automatic tuning).
Scanning stops when a station is received.
Press either side of the button repeatedly
until the desired station is received.
Note
If the automatic tuning stops too frequently, press
(LCL) to lights up "LCL" on the display (local seek mode).
Only the stations with relatively strong signals can be
tuned in.
Tip
If you know the frequency, press and hold either side of
(SEEK/AMS) until the desired station is received (manual
tuning).