Tuning In By Adjusting The Frequency; Memorizing Stations Automatically; Btm (Best Tuning Memory) Function; Memorizing Only The Desired Stations - Sony XR-6450 Operating Instructions Manual

Tuning in by Adjusting the
Frequency — manual Tuning
1 Select the desired band.
2 Press and hold either side of the PRESET
button.
Release the button when the desired station
is received.
For lower For higher
frequencies frequencies
PREVENTING ACCIDENTS!
When tuning in during driving, use the
automatic tuning and the memory preset
search function (page 9) instead of the manual
tuning.
Memorizing Stations
Automatically
— BTM (Best Tuning Memory) Function
This function selects from the currently
received band the stations with the strongest
signals and memorizes them in order of their
frequency.
1 Select the desired band.
2 Press the button for more than two
seconds.
¢ When there is no preset number indicated
on the display window, stations will be
stored on all preset number buttons on the
currently selected band.
¢ When there is a preset number indicated
on the display window, the unit will store
stations on all preset number buttons
from the one currently displayed.
For example, when you select FM2 and preset
number 3 is displayed,
the operation will start from preset number 3 on FM2, and
will stop at preset number 6 on FM3.
Memorizing Only the
Desired Stations
1 Select the desired band.
eas
2 Tune in the station which you wish to
store on the preset number button.
3 Keep the desired preset number button
((m] to (6 Se) pressed for about two
seconds until you hear a beep tone.
The number of the pressed preset number
button appears on the display window.
Up to 6 stations on each band (FM1, FM2, FM3, AM1
and AM2 can be stored on the preset number buttons in
order of your choice. Therefore, 18 stations can be
memorized on FM.
If you try to store another station on the same preset
nuntber button, the previously stored station will be
erased.
Receiving the Memorized
Stations
1 Select the desired band.
AM
2 Press momentarily the preset number
(( m0) to [6 Sis)) button on which the
desired station is stored.
Note
If you press the preset number button for more than two
seconds, the currently received station will be memorized
again. To receive the previously memorized station, make
sure that the preset number button is pressed only
momentarily,