Table of Contents
Advertisement
26
28
Memorizing the Stations Automatically
| ~\ets/ * | CG
62
eafevieriestes
()-—
ea)
o,.
Memorizing the Stations Automatically
— BTM (Best Tuning Memory) Function
1
Select the desired band.
o> CPD
2
Press the SENS button for more than two seconds.
Gens)
~ The BTM function --
During radio-reception, the BTM function searches all the
receivable stations within the currently selected band and
memorizes the ones in good receiving conditions in sequence
H
from the lowest frequency.
How to memorize the stations on the preset number buttons
—
When there is no preset number indicated on the main
display window, all the preset number buttons set in the
currently selected band will be filled with the memories.
~~ When there is a preset number indicated on the main display
window, the unit will memorize the stations on the preset
number buttons from the one currently being displayed. For
example, when you choose FM2 and preset number 3 is
being displayed, the operation will start from preset number 3
on FM2, and will stop at preset number 10 on FM2.
The best receiving stations
are automatically searched
and memorized on each
band (FM1, FM2 and AM).
Up to 10 stations on each
band can be stored on the
preset number buttons # to
10 in order of frequency.
You can use the supplied
wireless remote commander as
well.
The receivable frequency
ranges of the FM bands (FM1,
FM2) are the same
Therefore, 20 stations can be
memorized on FM.
Note
There may be cases where
there are not enough receivable
stations due to the fack of
stations in the vicinity or weak
broadcasting signals In such
cases, the BTM operation may
stop without all the buttons being
occupied with memories.
Receiving the Memorized Stations
1
Select the desired band.
Ca, 7am
Press the desired preset number button lightly.
INTRO
G)
— Go)
Receiving in Order the Stations Stored in
the Memory — Preset Search Function
Press either side of the PRESET button on the supplied remote
commander.
The number will advance in the following order:
mh 1289
10 1D.
(number of the preset number buttons)
ieee
aap 10-* 9-+ Bao...» Jao 2ae 1
10-9
8...
(number of the preset number buttons)
You can use the supplied
wireless remote commander as
well.
Notes
© There may be cases where
even the stations which are
stored in the memory cannot bo
received due to weak signals in
the vicinity of your car.
il you keep pressing the preset
number button for more than
two seconds, the currently
received station will be
memorized once more. To
receive the previously
memorized station, make sure
that the preset number
button
iS pressed only lightly
Memorizing Only the Desired Stations
For example, to store a station on preset number button 1.
1
Select the desired band.
Ca, 7D
Tune in the station which you wish to store on the
preset number button.
(+ — ewercex] + >)
ress the preset number button for about two
'Seconds unti! a beep tone is heard.
={
"©
g1g_ |
The number of the pressed preset number button now
appears on the main display window.
INTRO
Repeat the same procedure to store other stations.
Up to 10 stations on each
band (FM1, FM2 and AM)
can be stored on the
preset number buttons in
order of your choice.
You can use the supplied
wireless remote commander as
well.
Each preset number button
has only one memory location
per band
lf you try to store another station
on the same preset number
button, the previously stored
Stalion will be erased
27
4A. Displaying the Name of Each Station
Station Memo Function
evfertes) imc
Storiag-the Station Names in the Memory
of the Tuner
1 " Tune in a station whose name you wish to register.
(eh
GES
> CED
Press the FILE button for more than two seconds to
enter the name edit mode.
=>
xfa
77.
Name edit mode
3 Press either side of the [-\. /*) button to select
the desired characters.
Each time you press either side of the [=\_/*) button,
characters appear in the following order:
Ce
vo Ant Boo Cone Xue You Ze One 12 Dee J...
bj
Sethatlshpseageie:
You can store the names
of radko stations in the
memory of the tuner. The
name of the Station can be
displayed on the main
display window while the
station is being tuned in.
rere
You can use the supplied
wireless remote commander as
well.
29
Advertisement
Table of Contents
