Table of Contents
Advertisement
Pos: 3 7.7 /Ü bers chrifte n/1.1 /Elektrischer Anschluss @ 16\ mod_110 8040 1519 43_18. docx @ 1408 96 @ 2 @ 1
8.2
Electrical connection
Pos: 3 7.8 /Betriebsstör unge n/--- Ta bellenkopf (Störung, Ursache, Hinwei s) --- @ 31 \mod_1 1595 28614 629_1 8.docx @ 33 6831 @ @ 1
Fault
Pos: 3 7.9 /Betriebsstör unge n/Stromvers orgung - Allgemein/01 - Gerät arbeitet nicht (ohne Anpasstrafo, Netzteil ) @ 119 \mod_1 3240 29421 360_ 18.docx @ 12 6254 3 @ @ 1
Unit not working.
Pos: 3 7.10 / Übers chrifte n/1. 1/Gerätes pezi fisch @ 15 \mod_1 10656 5932 768_1 8.docx @ 13 5531 @ 2 @ 1
8.3
Unit-specific
Pos: 3 7.11 / Betriebs störunge n/ --- Tabellenk opf (Störung, Ursa che, Hi nweis) --- @ 3 1\mod_ 1159 52861 4629_ 18.docx @ 3 36831 @ @ 1
Fault
Pos: 3 7.12 / Betriebs störunge n/Ter motek/SHX 30/U mge bung stemperatur zu hoch - Bedie ner @ 15 8\mod_ 13736 2208 9673_ 18.docx @ 1 60549 0 @ @ 1
Ambient temperature too
high
Pos: 3 7.13 / Betriebs störunge n/Ter motek/SHX 30/Me dium-D urchfluss, K ühl medium z u warm, Te mp. zu hoch - Service, Bediener @ 158 \mod_1 3740 44515 722_1 8.docx @ 16 0709 8 @ @ 1
No or only insufficient
medium flow
The chilling medium is too
warm.
The ambient temperature is
too high.
Pos: 3 7.14 / -- leer --/ ====== == @ 1\ mod26_ 18.docx @ 2 7188 @ @ 1
Troubleshooting
Cause
No power supply.
Cause
Fan inoperative. The fuse on the fuse
board has tripped.
Fan defective.
Incorrect setting of the parameters.
The control valve is defective.
The customer-provided shut-off valves are
closed.
The customer-provided feed pump is
defective.
The setting of the external cooling water
supply is incorrect or the external cooling
water supply is defective.
The air cannot flow in/out.
VARISTAR Cooling unit SHX 30
Note
Switch the power supply system on.
Check the external fuse protection.
Check the supply cable for signs of damage
and ensure that it is properly connected.
Check the electrical circuit.
Check the fuses/micro-fuses.
Note
Check and replace (see the "System
Layout" and "Components" sections).
Check. Dismount and replace, if necessary.
Contact the service department.
Check and replace if necessary.
Check and open if necessary.
Check and replace if necessary.
Check and adjust if necessary.
Check the on-site components and replace
them if necessary.
Check the air inlets/outlets and keep them
free.
65
Advertisement
Table of Contents
