1
Condensate outlet
2
Chilling medium outlet
3
Chilling medium inlet
4
Venting point
5
Protective earth
6
Power supply connector (redundant power
supply)
Pos: 2 7.7 / -- leer --/= ======= @ 1\ mod26_1 8.docx @ 27 188 @ @ 1
System Layout
Note
•
The chilling medium connectors are located at the top and bottom of the unit
(back). Connectors that are not required must be sealed with a blind plug.
•
In the case of cooling modules with a water connection at the top, the condensate
outlet is also located at the top. These cooling modules are equipped with an
integrated condensate pump.
•
Connect the condensate outlet with a sufficient gradient to the wastewater
system.
•
Cooling modules with a redundant power supply are equipped with two power
supply units and mains power inputs. They can be supplied with power via two
independent mains power sources.
VARISTAR Cooling unit SHX 30
X
Connectors (top)
Y
Connectors (bottom)
21