Pos: 3 1.8 /Inbetriebna hme - MontageHinweis - Optimale Wa sserqualität z. Be füllung : s.Ka p."TD " - (ohne Rohrtrenner) @ 1 81\ mod_138 96011 7037 1_18. docx @ 1840 863 @ @ 1
Pos: 3 1.9 /Inbetriebna hme - Montage/MontageHinweis - Aufstellen, I nbetriebnahme, Komplettierung, Wartung ... der Geräte durch Fachpersonal @ 190 \mod_1 3966 09490 554_ 18.docx @ 19 0484 1 @ @ 1
Pos: 3 1.10 /I nbetriebnahme - M ontage/M ontageHinwei s - Lag erung oder Trans port bei <0° C, Verweis auf Frostschutz... @ 190 \mod_1 3966 09639 905_1 8.docx @ 19 04875 @ @ 1
Pos: 3 1.11 /I nbetriebnahme - M ontageVerweis - Weitere Infor matione n auf vers ch. Kapitel @ 30 \mod_1 1610 80564 982_ 18.docx @ 36 2557 @ @ 1
Pos: 3 1.12 / -- leer --/ ====== == @ 1\ mod26_ 18.docx @ 2 7188 @ @ 1
Setting Up
Note
Optimum water quality for filling: information can be found in the "Technical Data"
section.
Note
•
Only trained, specialised personnel is authorised to perform the set-up, start-up,
completion, maintenance, and service of the units.
•
Observe the "Safety" section.
•
Comply with the national rules and regulations concerning occupational health
and safety.
Note
The storage or transport at ambient temperatures below 0°C/32°F require special
measures in order to avoid frost damage.
•
Observe the "Anti-freeze and corrosion protection" section.
•
Transport the unit only without water.
For further information regarding connections, versions, pressure specifications, settings
etc. please refer to the following chapters:
•
Layout / System layout
•
Components
•
Maintenance
•
Technical Data
as well as the instruction labels on the unit (if provided).
VARISTAR Cooling unit SHX 30
33