Table of Contents
Advertisement
Pos: 3 1.53 / Übers chrifte n/1. 1/Einstell ungen @ 0\ mod123_ 18.docx @ 47 267 @ 2 @ 1
5.8
Adjustments
Pos: 3 1.54 /I nbetriebnahme - M ontage/Ter motek/ LHX 30/Einstellunge n - Service+ Bedie ner @ 24 2\ mod_ 1422 9593 04709 _18.docx @ 2 2356 57 @ @ 1
Parameter
Temperature
Sensor selection
Fan power
Valve position
Pos: 3 1.55 / -- leer --/ ====== == @ 1\ mod26_ 18.docx @ 2 7188 @ @ 1
Setting Up
Note
•
Please refer to the "Operation/Control Unit" section for information concerning
the operation of the control unit (display and operating unit).
•
If an error is indicated, press the ESC key. Following the pressing of the ESC key,
the first parameter will be displayed.
•
Select the various parameters by pressing the up or down key.
•
Eliminate the malfunction (see the "Troubleshooting" section).
1.
Switch the cooling module on via the control unit (see the start screen)
(parameter "Chiller" = "ON").
2.
Check the following parameters at the control unit and adjust them if necessary:
Description
Adjustment of the set temperature (air outlet).
Selection of the temperature sensor for the
temperature control.
Adjustment of the set speed of the fans.
Indication of the current opening degree of the
cooling valve in %.
VARISTAR Cooling unit SHX 30
Screen
Start screen (overview)
40
Advertisement
Table of Contents
