Basic Menu - ZeeVee ZvBox 170 Configuration Manual

Basic Menu

SET CHANNEL
Sets RF broadcast channel to X and HDTV channel to X.1
SET CHANNEL‐NAME
Sets channel name displayed on‐screen
SET VIDEO‐SOURCE
•
Select Test Image 1 before setting "VGA‐RES" parameter
SET AUDIO‐SOURCE
Sets audio source for current video source. If video source not
VGA or Component, sets both.
SET LANG/IDIOMA
Sets the language that is used at the Front Panel Display.
SHOW STATUS
Note: Scrolling through the SHOW STATUS section does not
allow you to change settings‐ it simply gives you information
about the operating status of your ZvBox 170
ADVANCED MENU
LOCK FRONT PANEL
®
ZvBox 170 Configuration Manual
www.zeevee.com Rev 1.0
Settings
2‐135
Any name, 7 characters or fewer
Component
VGA
Test‐image‐1
Test‐image‐2
None
Dig‐optical
Dig‐coax
USB
None
English
Español
Transmit (whether transmitting)
V‐in (Video input resolution)
V‐out (Video output resolution)
A‐in (Audio input type)
A‐out (Audio output type)
SN (Serial number)
HW Rev (Hardware version)
SW (Software version)
Temp (Temperature)
Up (Indicates continuous run time)
CC (Closed caption status)
Enter the advanced menu
Lock
Note: To unlock front panel, press all
four front‐panel buttons
simultaneously (Next, + , ‐, OK)
Possible Values
Page 6