Opening And Closing The Ids Plug Connection; (Tetracon ® 925/Lv-P) - wtw TetraCon 925/LV Operating Manual

®
TetraCon 925/LV
Opening the plug
connection
Closing the plug
connection
ba77131e02 12/2015
2.2

Opening and closing the IDS plug connection

®
(TetraCon
This section only applies to the IDS plug variant, TetraCon
4
3
Guidance
Groove
 If necessary, clean the plug connection.
 Open the locking device (step 1).
 Use your thumb and index finger to press the clips of the connector togeth-
er, and pull the connector out of the plug (step 2).
 Make sure that the plug connection is completely dry and clean.
 Align the guidance of the connector with the groove in the plug and insert
the connector in the unlocked plug until it catches (step 3).
 Close the locking device (step 4).
925/LV-P)
Plug connection
closed and locked
Measurement / Operation
®
- .
925/LV P
1
2
7