Table of Contents
Advertisement
Bluetooth®
Bluetooth®
Bluetooth mobile phone settings
You can change various settings for using Bluetooth
mobile phones on the <TEL SET-UP> screen.
1
Display the <TEL SET-UP> screen.
On the Home screen, touch as follows:
Then, on the <SET-UP> screen, touch [Bluetooth].
On the <Bluetooth Setup> screen, touch [TEL
SET-UP].
2
Make the settings.
<Bluetooth HF/Audio>*
Select the speakers used for Bluetooth mobile
phones.
• Front: Front speakers only.
• All (Initial): All speakers.
<Auto Response>
• 1 – 30 (in 5 second steps): The unit answers the
incoming calls automatically. Set the calling ring
time (seconds).
When there is another incoming call, the unit will
also answers the call in the selected time. The
previous call will be put on hold.
• OFF (Initial): The unit does not answer the calls
automatically. Answer the calls manually.
<Auto Pairing>
• ON (Initial): Establishes pairing automatically
with the iOS device (such as iPhone) connected
via USB. (Auto pairing may not work for some
devices depending on the iOS version.)
• OFF: Cancels.
<Sort Order>
Select a first name or last name to use when sorting
the list in alphabetical order.
• First: Sorts the list in the order of first name.
• Last (Initial): Sorts the list in the order of last
name.
* Selectable only when <X'over Network> is set to [2way].
(Page 30)
Settings
Settings
Audio settings
1
Display the <Audio> screen.
On the Home screen, touch as follows:
2
Select a setting to change.
E.g. Audio settings screen
You cannot change the <Audio> screen in the
following situations:
• When the AV source is turned off.
• When the Bluetooth phone is used (making or
receiving a call, during a call, or while voice dialing).
ENGLISH
29
Advertisement
Table of Contents
