Set The Initial Settings - Kenwood KDC-220UI Instruction Manual

Cd receiver
Hide thumbs Also See for KDC-220UI:
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 6
GETTING STARTED
To set the date
7
Turn the volume knob to select [DATE FORMAT], then press the knob.
8
Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press
the knob.
9
Turn the volume knob to select [DATE SET], then press the knob.
10
Turn the volume knob to make the settings, then press the knob.
Day  Month  Year or Month  Day  Year
11
Press and hold
to exit.
To return to the previous setting item, press
3

Set the initial settings

1
Press
repeatedly to enter STANDBY.
2
Press the volume knob to enter [FUNCTION].
• Pressing AUD enters [AUDIO CONTROL] directly.
3
Turn the volume knob to select an item (see the following table),
then press the knob.
4
Repeat step
3
until the desired item is selected or activated.
5
Press and hold
to exit.
To return to the previous setting item, press
AUDIO CONTROL
SWITCH PREOUT
REAR/SUBWOOFER or REAR/SUB-W: Selects whether rear speakers
or a subwoofer are connected to the line out terminals on the rear
(through an external amplifier).( 15)
SP SELECT
OFF/5/4/6×9/6/OEM: Selects according to the speaker size (5 inches
or 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum
performance.
DISPLAY
EASY MENU
.
TUNER SETTING
PRESET TYPE
SYSTEM
KEY BEEP
SOURCE SELECT
BUILT-IN AUX
P-OFF WAIT
.
Default: XX
CD READ
(For
/
When entering [FUNCTION]...
ON: ZONE 1 illumination changes to white color. ;
OFF: ZONE 1 illumination remains as [COLOR SELECT] color. ( 13)
• ZONE 2 illumination changes to light blue color when you enter
[FUNCTION], irregardless of the [EASY MENU] setting.
• Refer to the illustration on page 12 for zone identification.
NORMAL: Memorizes one station for each preset button in each band
(FM1/FM2/FM3/MW/LW). ; MIX: Memorizes one station for each preset
button, regardless of the selected band.
ON: Activates the keypress tone. ; OFF: Deactivates.
ON: Enables AUX in source selection. ; OFF: Disables. ( 10)
Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turn off (while in
standby mode) to save the battery.
20M: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes ;
WAIT TIME – – – or OFF – – –: Cancels
1: Automatically distinguishes between audio file disc and music CD. ;
2: Forces to play as a music CD. No sound can be heard if an audio file disc
is played.
)
5
ENGLISH

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kdc-120urKdc-120ugKdc-120ubKdc-172yKdc-152r

Table of Contents