Setting The Security Code; Calendar/Clock Settings - Kenwood DMX5019DAB Instruction Manual

Monitor with receiver
Table of Contents

Advertisement

Getting Started
Getting Started
[Display] (Page 34)
Make the settings to adjust the display.
[Camera] (Page 37)
Make the settings to display the picture from the
connected rear view camera.
[DEMO]
• ON (Initial): Activates the display demonstration.
• OFF: Deactivates the display demonstration.

Setting the security code

You can set a security code (four-digit number of your
choice) to protect your receiver system against theft.
• Once you set the security code, you are required to
input the security code if you have disconnected the
unit from the battery.
Enter the security code you have set in step 3, then
touch [Enter] when you reconnect the battery.
1
Display the Home screen.
2
Display the <Security Code Set> screen.
On the Home screen, touch as follows:
Then, on the <SET-UP> screen, touch as follows:
[Security]  [Security Code Set]
3
Enter a four-digit number (
confirm the entry (
2
).
• To clear the last entry, touch [BS].
• To cancel the setting, touch [
4
Enter the four-digit number entered in
step 3 and touch [Enter] again to confirm
your security code.
To change the security code: Touch [Security Code
Change] on the <Security> screen on step 2, then
repeat steps 3 and 4.
To clear the security code: Touch [Security Code
Cancellation] on the <Security> screen on step 2,
then repeat step 3.

Calendar/clock settings

1
Display the Home screen.
2
1
), then
Display the <User Interface> screen.
On the Home screen, touch as follows:
Then, on the <SET-UP> screen, touch [User
Interface].
3
Set the date and clock.
].
[Clock]
Select the method to set the date and clock.
• DAB-SYNC (Initial): Synchronizes the clock with
the digital radio (DAB).
• Manual: Sets the date and clock manually.
[Time Zone]*
Select the time zone for your area.
[Clock Adjust]*
Set the date and clock manually when [Clock] is
set to [Manual].
J
Touch [
date), then clock (hour/minute). To finish setting,
touch [Set].
* Selectable when [Clock] is set to [Manual].
K
]/[
] to adjust the date (year/month/
ENGLISH
5

Advertisement

Table of Contents
loading

Table of Contents