Table of Contents
Advertisement
DPX794BH
DPX594BT
DPX560BT
DUAL DIN SIZED CD RECEIVER
INSTRUCTION MANUAL
RECEPTEUR CD FORMAT DUAL DIN
MODE D'EMPLOI
RECEPTOR DUAL DE CD TAMAÑO DIN
MANUAL DE INSTRUCCIONES
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial
numbers whenever you call upon your Kenwood dealer for information or service on the product.
Model DPX794BH/DPX594BT/DPX560BT/DPX524BT/DPX504BT/DPX304MBT
Serial number
US Residents Only
© 2019 JVCKENWOOD Corporation
DPX524BT
DPX504BT
Register Online
Register your Kenwood product at http://www.kenwood.com/usa/
DPX304MBT
DUAL DIN SIZED DIGITAL MEDIA RECEIVER
INSTRUCTION MANUAL
AUTORADIO MULTIMÉDIA NUMÉRIQUE DEUX DIN
MODE D'EMPLOI
RECEPTOR DE MEDIOS DIGITALES TAMAÑO DOBLE DIN
MANUAL DE INSTRUCCIONES
B5A-3149-00a (KN)
Advertisement
Table of Contents
Related Manuals for Kenwood DPX794BH
Summary of Contents for Kenwood DPX794BH
- Page 1 Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
- Page 2 Products: DUAL DIN SIZED CD RECEIVER desechados como residuos domésticos. Los equipos eléctricos y electrónicos al final Model Name: DPX794BH/DPX594BT/DPX560BT/DPX524BT/DPX504BT de la vida útil, deberán ser reciclados en instalaciones que puedan dar el tratamiento Products: DUAL DIN SIZED DIGITAL MEDIA RECEIVER adecuado a estos productos y a sus subproductos residuales correspondientes.
- Page 3 SOFTWARE LICENSE AGREEMENT IC (Industry Canada) Caution This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions conditions: which Users shall follow in order to use the Licensed Software.
- Page 4 Article 4 Right pertaining to the Licensed Software Article 9 Destruction of the Licensed Software Any and all copyrights and other rights pertaining to the Licensed Software and related documents If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or Software, any related documents and copies thereof within two (2) weeks from such date of termination.
- Page 5 Important Notice concerning the Software -CMP The MIT License (MIT) Copyright (c) 2014 Charles Gunyon -jansson Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated Copyright (c) 2009-2012 Petri Lehtinen <petri@digip.org> documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated...
- Page 6 sha2 Copyright (c) 1995, 1996 Carnegie-Mellon University. All rights reserved. AUTHOR: Aaron D. Gifford - http://www.aarongifford.com/ Author: Chris G. Demetriou Copyright (c) 2000-2001, Aaron D. Gifford Permission to use, copy, modify and distribute this software and its documentation is hereby granted, All rights reserved.
- Page 7 T-Kernel 2.0 Accordo2 Player This product uses the source code of T-Kernel 2.0 under T-License 2.0 granted by T-Engine Forum Apache License (www.tron.org) Licensed under the Apache License, Version 2.0, January 2004(the "License"); BSD-3-Clause You may obtain a copy of the license at Copyright (c) 2000-2001, Aaron D.
-
Page 8: Table Of Contents
For this reason, they may Using Other Applications ..............20 be different from the actual displays or faceplates. KENWOOD Remote application • Operations are explained mainly using buttons on the faceplate of TuneIn Radio/TuneIn Radio Pro •... -
Page 9: Before Use
Before Use IMPORTANT • (Except for If a disc error occurs due to condensation on the laser lens, eject the disc • To ensure proper use, please read through this manual before using this and wait for the moisture to evaporate. product. -
Page 10: Basics
Basics Faceplate How to reset Loading slot Display window*1 Eject button *1 Only for illustration purpose. *2 For : You can also turn off the display information by pressing DISP repeatedly. (Page 42) : USB cable from the rear of the unit Volume knob (USB input terminal). -
Page 11: Getting Started
Getting Started Basics Remote control (RC-406) (supplied for Remote sensor (Do not expose to bright sunlight.) Pull out the insulation sheet when using for the first time. Select the display language and cancel the demonstration : Can be remotely controlled with an optionally purchased remote control. When you turn on the power for the first time (or [FACTORY RESET] is set to [YES], see page 7), the display shows: “SEL LANGUAGE” ... -
Page 12: Set The Clock And Date
Getting Started Default: [XX] Set the clock and date [DISPLAY] Press the volume knob to enter [FUNCTION]. [EASY MENU] When entering [FUNCTION]... Turn the volume knob to select [CLOCK], then press the knob. [ON]: [LCD DISPLAY] illumination changes to white color. ; [OFF]: [LCD DISPLAY] illumination remains as [COLOR SELECT] color. -
Page 13: Hd Radio
[YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not [F/W UP Vxx] activated). For details on how to update the firmware, visit <www.kenwood.com/cs/ce/>. Search for a station [FACTORY RESET] [YES]: Resets the settings to default (except the stored station). ;... - Page 14 HD Radio™ Tuner (for Receive an emergency alert message Direct Access Tuning (using the remote control) When an emergency alert message is received, it appears and remains on Press DIRECT to enter Direct Access Tuning. the display until the user performs the “Ignore” function. Press the number buttons to enter a station frequency or channel number.
-
Page 15: Radio
Radio HD Radio™ Tuner (for (for Default: [XX] [TUNER SETTING] [SEEK MODE] Selects the searching method for S / T buttons when pressed. [AUTO1]: Automatically search for a station or channel. ; [AUTO2]: Search for a preset station or channel. ; [MANUAL]: Manually search for a station or channel. - Page 16 Radio (for Direct Access Tuning (using the remote control) [NEWS SET] (For [ON]: The unit will temporarily switch to News Programme if available. ; Press DIRECT to enter Direct Access Tuning. [OFF]: Cancels. Press the number buttons to enter a station frequency. [REGIONAL] (For Press ENT IW to search for a station.
-
Page 17: Cd/Usb/Ipod
CD/USB/iPod Insert a disc Connect an iPod/iPhone (except for Label side Eject disc USB input terminal iPod/ iPhone KCA-iP103 (optional accessory)*1 or accessory of the iPod/iPhone*2 (For You can also connect to the USB cable from the rear of the unit (USB input terminal). The source changes to iPod FRONT/iPod REAR/iPod USB automatically and playback starts. - Page 18 CD/USB/iPod You can also select the music drive from the [FUNCTION] menu. On the faceplate On the remote control Press the volume knob to enter [FUNCTION]. Press 6 IW. Press ENT IW. Play back/pause Turn the volume knob to select [USB], then press the knob. Reverse/ Press and hold Press and hold...
- Page 19 CD/USB/iPod [SKIP SEARCH] setting Select a file to play Press the volume knob to enter [FUNCTION]. From a folder or list Turn the volume knob to select [USB], then press the knob. Turn the volume knob to select [SKIP SEARCH], then press the knob. •...
-
Page 20: Pandora
Pandora® (for You can listen to Pandora on iPhone/iPod touch (via Bluetooth or via USB On the faceplate On the remote control input terminal) or Android device (via Bluetooth). Press 6 IW. Press ENT IW. Play back/pause Preparation: Skip a track Press T. -
Page 21: Spotify
(for Spotify Pandora® You can listen to Spotify on iPhone/iPod touch (via Bluetooth or via USB Bookmark current song information input terminal) or Android device (via Bluetooth) (page 22). Press and hold the volume knob. Preparation: “BOOKMARKED” appears and the information is stored to your device. •... - Page 22 Spotify Search for a song or station On the faceplate On the remote control Press 6 IW. Press ENT IW. Play back/pause Press Turn the volume knob to select a list type, then press the knob. Press S*1 / T. Press S*1 / T (+).
-
Page 23: Siriusxm® Radio
SiriusXM® Radio (for Only SiriusXM® brings you more of what you love to listen to, all in one place. Start listening Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite Press B SRC repeatedly to select SIRIUS XM. - Page 24 SiriusXM® Radio (for SiriusXM Keymode SmartFavorites and TuneStart™ User stored channels are recognized as SmartFavorite channels*. The Press and hold the volume knob to change the keymode (channel or SiriusXM Vehicle Tuner automatically buffers the broadcast content in the replay). (Default: Channel keymode) background.
- Page 25 SiriusXM® Radio (for SiriusXM settings [LOCK SETTING] [MATURE CH]: Selects the SiriusXM-defined lock setting. ; [USER DEFINED]: Selects the individual channels the user wants to Press the volume knob to enter [FUNCTION]. lock. ; [OFF]: Cancels. Turn the volume knob to select an item (see the following table), then [CHANNEL EDIT]*1 1 Turn the volume knob to select a category, then press the knob.
-
Page 26: Aux
You can listen to music from a portable audio player via the auxiliary input KENWOOD Remote application jack. You can control the KENWOOD car receiver from iPhone/iPod touch (via Bluetooth or via USB input terminal) or Android device (via Bluetooth) using Preparation: KENWOOD Remote application. - Page 27 Using Other Applications Settings to use KENWOOD Remote application [STATUS] Shows the status of the selected device. [IOS CONNECTED]: You are able to use the application using the iPhone/ Press the volume knob to enter [FUNCTION]. iPod touch connected via Bluetooth or USB input terminal.
-
Page 28: Bluetooth
Bluetooth features may not work with this Press B SRC to turn on the unit. unit. Search and select the name of your receiver (“DPX794BH”/ • Be sure to turn on the Bluetooth function of the device to make the “DPX594BT”/“DPX560BT”/“DPX524BT”/“DPX504BT”/“DPX304MBT”) on following operations. -
Page 29: Bluetooth - Mobile Phone
Bluetooth® The following operations may differ or be unavailable depending on the Auto Pairing connected phone. When you connect iPhone/iPod touch to the USB input terminal, pairing request (via Bluetooth) is automatically activated if [AUTO PAIRING] is set to On the faceplate On the remote control [ON]. - Page 30 Bluetooth® Make the setting for receiving a call On the faceplate On the remote control Press to enter Bluetooth mode. Adjust the phone Turn the volume Press VOL Turn the volume knob to select an item (see the following table), then volume*1 knob during a call.
- Page 31 Bluetooth® [CALL HISTORY] (Applicable only if the phone supports PBAP.) [VOICE] Speak the name of the contact you want to call or the voice command to 1 Press the volume knob to select a name or a phone number. control the phone functions. (See also the following “Make a call using voice •...
- Page 32 To return to the previous setting item, press Press and hold “PLEASE PAIR YOUR PHONE PIN 0000” appears on the display. Default: [XX] Search and select the name of your receiver (“DPX794BH”/ [BT MODE] “DPX594BT”/“DPX560BT”/“DPX524BT”/“DPX504BT”/“DPX304MBT”) on the Bluetooth device. [PHONE SELECT] Selects the phone or audio device to connect or disconnect.
-
Page 33: Bluetooth - Audio
Bluetooth® Bluetooth — Audio On the faceplate Repeat play Press 4 repeatedly. [ALL REPEAT]/[FILE REPEAT]/[GROUP REPEAT]*/ [REPEAT OFF] Random play Press and hold 3 to select [ALL RANDOM] or [GROUP RANDOM]*. • Press 3 to select [RANDOM OFF]. Select a file from a folder/list Refer to “Select a file to play” on page 13. Switch between connected Press 5. -
Page 34: Amazon Alexa
Tap “Automotive Accessory” or “Headphones” from the list of device home devices, shop on Amazon, search the internet, set reminders and more. types. Tap the name of your receiver (“DPX794BH”/“DPX594BT”/“DPX560BT”/ Preparation: “DPX504BT”/“DPX304MBT”) and follow the instructions. • Create an account at <www.amazon.com>. -
Page 35: Audio Settings
(for Audio Settings AMAZON ALEXA Press on the unit to speak with Alexa. The display shows: “ALEXA” “LISTENING...”. Communicate with Alexa via the connected microphone. (Page 22) “THINKING...” appears when Alexa is processing your voice input. “SPEAKING...” appears while Alexa is responding to your voice input. “ALEXA”... - Page 36 Audio Settings [MANUAL EQ] Adjusts your own sound settings for each source. [SOUND EFFECT] • The settings are stored to [USER] in [PRESET EQ]. [SOUND RECNSTR] (Not applicable for RADIO source, AUX source and SIRIUS XM source.) • The settings made may affect the current settings of [EASY EQ]. (Sound [ON]: Creates realistic sound by compensating the high-frequency [62.5HZ]...
- Page 37 Audio Settings [X ‘ OVER] [SW LPF SLOPE] [–6DB]/[–12DB]/[–18DB]/[–24DB]: Adjusts the crossover slope. [TWEETER] [FRQ] [1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/[5KHZ]/ (Selectable only if a setting other than [THROUGH] is [6.3KHZ]/[8KHZ]/[10KHZ]/[12.5KHZ]: Adjusts the selected for [SW LPF FRQ].) crossover frequency for the tweeter speaker. [SW LPF [REVERSE] (180°)/[NORMAL] (0°): Selects the [GAIN LEFT] [–8] to [0]: Adjusts the output volume of the left...
- Page 38 Audio Settings • Before making an adjustment for [DISTANCE] and [GAIN] of [DTA SETTINGS], Digital Time Alignment settings select the speaker you want to adjust: Digital Time Alignment sets the delay time of the speaker output to create a [FRONT LEFT]/[FRONT RIGHT]/[REAR LEFT]/[REAR RIGHT]/[SUBWOOFER] more suitable environment for your vehicle.
-
Page 39: Display Settings
Display Settings Zone identification for color settings and brightness settings Default: [XX] [DISPLAY] [COLOR SELECT] Selects illumination colors for [ALL ZONE], [LCD DISPLAY], [KEY 1] and [KEY 2] separately. 1 Select a zone. (See the illustration on left column.) 2 Select a preset color for the selected zone. (Page 34) Default: [VARIABLE SCAN] To make your own color, select [CUSTOM R/G/B]. -
Page 40: Learning Steering Remote Control
Purple/red Gray/red Learning steering remote input terminal Connect to your vehicle’s steering remote harness. Contact your KENWOOD dealer for details. Rear panel Configure the control keys Press B SRC repeatedly to enter STANDBY. Press the volume knob to enter [FUNCTION]. -
Page 41: Installation/Connection
Installation/Connection Learning Steering Remote Control (for Press and hold any control keys on your steering remote control This section is for the professional installer. which you want to assign. For safety’s sake, leave wiring and mounting to professionals. Consult the A list of key functions will appear on the display. - Page 42 Installation/Connection Part list for installation Basic procedure Remove the key from the ignition switch, then disconnect the (Parts supplied for terminal of the car battery. Connect the wires properly. (A) Mounting sleeve ( ×1 ) (B) Trim plate ( ×1 ) See “Wiring connection”...
- Page 43 Installation/Connection Installing in Toyota cars Installing the unit (without mounting sleeve) Align the holes in the unit (on both sides) with the vehicle mounting (For bracket and secure the unit with screws (supplied). • For : Remove the mounting sleeve Install onto the car brackets using screws (E) or (F) (supplied).
-
Page 44: Wiring Connection
If no connections are made, do not let the wire come out from the tab. To front speaker (left) White/Black Gray Brown To connect the Kenwood navigation system, refer your To front speaker (right) Gray/Black (Mute control wire) navigation manual... - Page 45 Installation/Connection (For Connect external components (For Part Expansion port (12 V 500 mA): To the optional SiriusXM Vehicle Tuner (commercially available) (Page 17) Part Output terminals : USB cable (DC 5 V 1.5 A) REAR: Rear output FRONT: Front output : Learning steering remote control (Page 34) Subwoofer output •...
-
Page 46: References
• The song order displayed on the selection menu of this unit may differ from that of the iPod/ iPhone. • You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod. • Depending on the version of the operating system of the iPod/iPhone, some functions may not operate on this unit. - Page 47 References About Pandora For Radio Data System: [SPEECH]: • Pandora is only available in certain countries. [NEWS], [AFFAIRS], [INFO] (information), [SPORT], [EDUCATE], [DRAMA], [CULTURE], For more information, visit <www.pandora.com/legal>. [SCIENCE], [VARIED], [WEATHER], [FINANCE], [CHILDREN], [SOCIAL], [RELIGION], • Because Pandora is a third-party service, the specifications are subject to change without prior [PHONE IN], [TRAVEL], [LEISURE], [DOCUMENT] notice.
-
Page 48: Change The Display Information
References Change the display information Source name Display information: Main display (supplementary) CD / For CD-DA: Each time you press DISP, the display information changes. USB FRONT/ Track title (Artist) Track title (Disc title) Track title (Date) Playing time • If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information USB REAR/ (Date) Turns off the display*... -
Page 49: Troubleshooting
Troubleshooting Symptom Remedy Symptom Remedy Sound cannot be heard. • Adjust the volume to the optimum level. Playback order is not as The playback order is determined by the order in which • Check the cords and connections. intended. files were recorded (disc) or the file name (USB). “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals of Elapsed playing time is not... - Page 50 Troubleshooting Symptom Remedy Symptom Remedy “NA FILE” Make sure the media (disc/USB) contain supported audio “DISCONNECTED” USB is disconnected from the head unit. Please make files. (Page 40) sure the device is connected properly through USB. “COPY PRO” A copy-protected file is played (disc/USB). “CONNECTING”...
- Page 51 Troubleshooting Symptom Remedy Symptom Remedy “CODE ERROR” Make sure you have entered the correct pass code. The connected Bluetooth • Check whether the connected Bluetooth audio player (Page 19) audio player cannot be supports Audio/Video Remote Control Profile (AVRCP). controlled. (Refer to the instructions of your audio player.) “NO CONTENT”...
-
Page 52: Specifications
Specifications Troubleshooting Symptom Remedy No response from Alexa after Amazon cloud was unable to analyze the voice input. Frequency Range 87.9 MHz — 107.9 MHz (200 kHz step) the voice input. Usable Sensitivity 7.2 dBf (0.63 μV/75 Ω) Wrong response from Alexa. Alexa misunderstood what was said or did not catch (S/N = 30 dB) the entire request or sentence spoken. - Page 53 Specifications Laser Diode GaAIAs Digital Filter (D/A) 8 times over sampling Frequency Range Spindle Speed 500 rpm — 200 rpm (CLV) 87.9 MHz — 107.9 MHz (200 kHz step) Wow & Flutter Below measurable limit Frequency Response (±1 dB) 20 Hz — 20 kHz 87.5 MHz —...
- Page 54 Specifications USB Standard USB 1.1, USB 2.0 (High speed) Maximum Output Power 50 W × 4 File System FAT12/16/32 Full Bandwidth Power 22 W × 4 (at less than 1 % THD) Maximum Supply Current DC 5 V 1.5 A Speaker Impedance 4 Ω...
- Page 55 Specifications Operating Voltage 12 V DC car battery Installation Size (W × H × D) 182 mm × 111 mm × 156 mm (7-3/16" × 4-3/8" × 6-1/8") 178 mm × 100 mm × 156 mm (7” × 3-15/16” × 6-1/8”) 178 mm ×...
- Page 56 • Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. For patents see http://dts.com/patents. HD Radio™ and the HD, HD Radio, and “ARC” logos are registered trademarks or trademarks of iBiquity Digital Corporation in the United States and/or other countries.