Bluetooth - Mobile Phone - Kenwood KDC-BT640U Instruction Manual

Bluetooth®
Auto Pairing
When you connect iPhone/iPod touch to the USB input terminal, pairing
request (via Bluetooth) is automatically activated if [AUTO PAIRING] is set to
[ON]. (Page 18)
Press the volume knob to pair once you have confirmed the device name.
Bluetooth — Mobile phone
Receive a call
When there is an incoming call:
• [ZONE 2] illuminates in green color and flashes.
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected
time. (Page 16)
During a call:
• [ZONE 1] illuminates according to the settings made for [DISPLAY]
(page 25) and [ZONE 2] illuminates in green color.
• If you turn off the unit or detach the faceplate, Bluetooth is disconnected.
The following operations may differ or be unavailable depending on the
connected phone.
To On the faceplate
First incoming call...
Answer a call
Press
volume knob or
one of the number
buttons (1 to 6).
Reject a call
Press
End a call
Press
While talking on the first incoming call...
Answer another Press
incoming call and hold
the current call
Reject another incoming
Press
call
While having two active calls...
End current call and
Press
activate held call
Swap between the Press
current call and held call
Adjust the phone Turn the volume
volume*1 knob during a call.
[00] to [35] (Default: [15])
Press 6 IW during
Switch between hands-
free and private talk
a call.
modes*3
*1, *2, *3: See page 16.
On the remote control
or the Press .
Press .
.
Press .
.
. Press .
Press .
.
Press .
.
. Press .
Press VOL *2 or
VOL during a call.
( Not available )
ENGLISH
15