Specifications - Kenwood DMX5019DAB Instruction Manual

Monitor with receiver
Table of Contents

Advertisement

Troubleshooting
Troubleshooting
The unit does not respond when you try to copy
the phonebook to the unit.
 You may have tried to copy the same entries (as
stored) to the unit.
"Connection Error" appears.
 The device is registered but the connection has
failed. Connect the registered device. (Page 24)
"Please Wait..." appears.
 The unit is preparing to use the Bluetooth function.
If the message does not disappear, turn the power
off and on, then connect the device again.
"No Voice Device" appears.
 The connected mobile phone does not have a
voice recognition system.
"No Contents" appears.
 No phonebook data is contained in the connected
Bluetooth phone.
"Initialise Error" appears.
 The unit has failed to initialize the Bluetooth
module. Try the operation again.
"Dial Error" appears.
 Dialing has failed. Try the operation again.
"Hung Up Error" appears.
 The call has not ended yet. Park your car, and use
the connected mobile phone to end the call.
"Pick Up Error" appears.
 The unit has failed to receive a call.
The Bluetooth connection between the Bluetooth
device and the unit is unstable.
 Delete the unused registered Bluetooth device
from the unit. (Page 24)
50
ENGLISH

Specifications

Specifications
Monitor section
Picture Size (W × H)
6.2 inches (diagonal) wide
137.5 mm × 77.2 mm
Display System
Transparent TN LCD panel
Drive System
TFT active matrix system
Number of Pixels
1 152 000
(800H × 480V × RGB)
Effective Pixels
99.99%
Pixel Arrangement
RGB striped arrangement
Back Lighting
LED
USB interface section
USB Standard
USB 2.0 High Speed
Compatible Device
Mass Storage Class
File System
FAT 16/FAT 32/NTFS
Maximum Power
DC 5 V
1.5 A
Supply Current
D/A Converter
24 bit
Audio Decoder
MP3/WMA/AAC (.m4a)/WAV/
FLAC
Video Decoder
MPEG1/MPEG2/MPEG4/
H.264/WMV/MKV
Frequency
96 kHz Sampling:
Response
20 Hz to 20 000 Hz
48 kHz Sampling:
20 Hz to 20 000 Hz
44.1 kHz Sampling:
20 Hz to 20 000 Hz
Total Harmonic
0.020% (1 kHz)
Distortion
Signal to Noise Ratio
104 dB
Dynamic Range
90 dB

Advertisement

Table of Contents
loading

Table of Contents