Ipod/Iphone - Kenwood DMX5019DAB Instruction Manual

iPod/iPhone

iPod/iPhone
Connecting an iPod/iPhone
• For playable iPod/iPhone types and other
information, see page 47.
• You cannot watch video.
Wired connection
iPod/iPhone
(commercially available)
USB Audio cable for iPod/iPhone:
KCA-iP103 (optional accessory)
You can also connect to the USB2 cable.
12 ENGLISH
Only one iPod/iPhone can be used at a time. The first
detected device will be used. If you try to connect
another iPod/iPhone to the other USB input terminal,
the following message will pop-up:
"Only the first connected iPod can be used. Please
disconnect the another iPod at first, and try reconnect
this iPod again."
Bluetooth connection
Pair the iPod/iPhone with this unit via Bluetooth.
(Page 23)
Playback operations
Playback information and key operation
• For playback information, see "Source control screen"
on page 7.
• For key operations on the touch panel, see "Common
operation keys on source control screen" on
page 8.
Rear panel
Selecting an audio file from the menu
1
Display the list.
On the source control screen, touch as follows:
2
Select the list type.
3
Select the desired track.
• Repeat the procedure until you select the desired
track.
• For details about the list operation, see
page 9.
From <Category List>:
Select a category, then the item in the selected
category.
• Available categories differ depending on the type
of iPod/iPhone.
From <Link Search>:
Select the tag type to display a list of contents that
contain the same tag as the track/file currently
being played, then select the item.