ultracomfort UC214 Service Manual page 75

P/N: HV3100-UC (DHV System with 2 zones)
P/N: HV3000-UC (DHV System with 3 zones)
Models: All with standard heat &
Hand Controls -
P/N: HV4200 (BHV System)
Models: PL340, UC480,
UC522, UC524
Hand Control - Heat & Massage Only
Press PWR to turn On or Off.
15 Minute Timer: Single Press (GREEN)
30 Minute Timer: Press & Hold (ORANGE)
Press LO or HI to turn HEAT ON or OFF.
Independent 30 Minute Timer.
Press any or all ZONE keys to turn any ZONE On or Off.
Press SELECT, WAVE, or PULSE for desired operating mode.
Press – (Left) to decrease or + (Right) to increase INTENSITY and SPEED.
massage.
Input Power: +27Vdc Switching Power Supply
The power button needs to be turned on to activate all the functions of the hand
control. Activating the hand control starts a 20 minute timer. To restart the timer after
it shuts off, press the PWR button again. Lights will dim to conserve energy after
about 10 seconds of non use.
PWR Button Operation:
Green = Power on
Blue = Power off
Power Lock Out
To lock the hand control, press and hold PWR button for 4 seconds. The button will
glow red. To unlock the hand control, press and hold PWR button for 4 seconds. The
button will glow blue. After unlocking the hand control, you will need to press the
PWR button to turn on the power to the hand control.
MSG Button Operation:
Press to turn on the vibrators.
Press again to turn off the vibrators.
HEAT Button Operation:
Press to turn on the heating pad.
Press again to turn off the heating pad.
Arrow Key Operation:
Arrow Up (S1) = Recline Position
Arrow Down (S2) = Seated Position
Timer Functions: There are two separate timer functions, One for Heat, and the
other for Massage functions.
Heat Timer – Heat timer is activated when the heat button is depressed. Timer is
factory set for 20 minutes.
Massage Timer- Massage timer is activated when the PWR button is depressed.
Timer is factory set for 20 minutes.
Lift & Recline and Heat & Massage
75