Attaching Cradle Motor to Frame
Fig 1
Step 1 - Align the back of cradle motor (GM1450-CM) to frame bracket. Insert clevis pin (BB5512)
3/8" x 1 5/8" through frame, two nylon washers (BB5535) 394 x 750 x 125, motor and attach with
hair pin (BB5514). Fig 1
Fig 2
Step 2 - Align the cradle motor fork head to frame bracket. Insert clevis pin (BB5512) 3/8" x 1 5/8"
through the frame, two nylon washers (BB5540) 394 x 750 x 125, motor tip and attach the hair pin
(BB5514). Fig 2
LM5124 LIFT FRAME - CRADLE MOTOR
For use in model: UC558-MLA
63