Measurement Display; Displaying The Voltage - Kikusui PCR1000WEA User Manual

Measurement Display

You can monitor the present output value. When the output is off, this is nearly 0.
You can change the phase to display for single-phase three-wire output and three-phase output.

Displaying the voltage

The measured voltage is displayed in the status, measured-value, and setting display area.
You can select whether to display the rms, peak, or average voltage.
Press V-MEAS (SHIFT+V) to select the item that you want to display.
For single-phase three-wire output and three-phase output, you can select to display the phase voltage or
line voltage (p.42).
Parameter
RMS(F1)
PEAK(F2)
DC(F3)
*1
LINE (F4)
*1. Only for single-phase three-wire output and three-phase output
Averaging voltage measurements
You can average the rms-voltage and average-voltage measurements and display the result.
Press V-MEAS (SHIFT+V) > 1/2 (F6) > AVERAGE (F4) to select whether to average the voltages.
Parameter
AVERAGE(F4) Average Count Values will be averaged.
PCR-WEA/PCR-WEA2
Title
V-Meas
ON(F2) V-Line
OFF(F3)
Title Description
Average count (moving average): 1 to 32
The voltage
Unit Description
V rms Displays the rms voltage
V pk Displays the peak voltage
V dc Displays the average voltage
V rms Displays the line voltage
Displays the phase voltage
Basic Functions
(p.42)
63
User's Manual