Service And Maintenance Instructions - Klauke K 18 Instruction Manual

Instruction manual K 18
_______________________________________________________________________________________________________________
3.3. Service and maintenance instruction
This mechanical crimping unit has to be cleaned and dried after use. The unit is basically
maintenance-free, only the bolt joints have to be oiled regularly.
3.4. Storage and transport of the crimping tool
In order to protect the tool against damages it has to be cleaned carefully after every use
and be put into the transportation case which has to be closed safely. Into this case you
can put 34 dies and the instruction manual.
4. Technical Data
Crimping head can be turned 360° in a pressure-free state.
Weight of the tool:
Length of the entire tool:
Instruction manual K 18
_______________________________________________________________________________________________________________
3.3. Service and maintenance instruction
This mechanical crimping unit has to be cleaned and dried after use. The unit is basically
maintenance-free, only the bolt joints have to be oiled regularly.
3.4. Storage and transport of the crimping tool
In order to protect the tool against damages it has to be cleaned carefully after every use
and be put into the transportation case which has to be closed safely. Into this case you
can put 34 dies and the instruction manual.
4. Technical Data
Crimping head can be turned 360° in a pressure-free state.
Weight of the tool:
Length of the entire tool:
ca. 2,5 kg
580-830 mm
ca. 2,5 kg
580-830 mm
page 14
page 14