Page 1
操 作 使 用 说 明 书 K-EP 1342 Serial Number 序列号 CN.2P015 06/2014 KN...
Page 2
Bedienungsanleitung/Instruction manual K-EP 1342 使用说明书 K-EP 1342 Crimping tool Voltage: 18V DC 120 kN / 13.5 short tons Force: datecode/ Year Code Month Code Month Code WORK 工作 Jan. July 2013 Feb. Aug. 2014 batch# e.g. 304711 Mar. Sept. SERVICE...
Page 3
Bedienungsanleitung/Instruction manual K-EP 1342 使用说明书 4 - 40°C K-RAL2 60 min. K-LGL1 Li-ion Li-ion Tab. 1 / Connect the charger into power outlet before inserting battery pack, all three charging LEDs will be on for two seconds and then off 插入电池组前,将充电器接入电源插座,所有三个充电发光二极管将亮2秒,随后关闭。...
Instruction Manual Crimping Tool K-EP 1342 使用说明书 Index Table 3 (see Picture 1) Introduction Pos. Description Function Warranty LED (red) Indicator for battery charge Description of the electric-hydraulic control, tool functions and crimping tool faults Description of the components Battery...
Attention Dress properly. Do not wear loose clothing or Have damaged parts repaired by a quali ed ex- jewellery. Keep your hair, clothing and gloves pert or by a Klauke ASC before use. away from moving parts. Attention Troubleshooting Keep proper footing and balance at all times.
NOTE: • DO NOT store or use the tool, charger and battery pack This charger can only charge the Klauke 18V batte- in locations where the temperature may reach or ex- ry pack K-RAL2. ceed 50 °C, as this could lead to deterioration of the storage battery.
Page 11
EMERSON PROFESSIONAL TOOLS 地址:上海松江工业区江田东路89号 电话:400-820-5695 www.klauke.com.cn...