Klauke K 18 Instruction Manual page 13

Instruction manual K 18
_______________________________________________________________________________________________________________
continuing Table 1
_________________________________________________________________________________________________________
h 10-50 mm²
_________________________________________________________________________________________________________
i 4-50 mm²
_________________________________________________________________________________________________________
j 10-95 mm²
_________________________________________________________________________________________________________
k 10-95 mm²
_________________________________________________________________________________________________________
l 2x4-2x16 mm²
_________________________________________________________________________________________________________
m ∅ 18
mm
_________________________________________________________________________________________________________
Attention
Do only crimp copper and aluminium conducting material or special
connecting material mentioned in table 2.
If other conducting materials have to be crimped, please contact the manufacturer.
Attention
Do not use on live electrical circuits.
Before starting to crimp please make sure that all parts involved in the crimping process
are not energised.
Instruction manual K 18
___________________________________________________________________________
continuing Table 1
_________________________________________________________________________________________________________
h 10-50 mm²
_________________________________________________________________________________________________________
i 4-50 mm²
_________________________________________________________________________________________________________
j 10-95 mm²
_________________________________________________________________________________________________________
k 10-95 mm²
_________________________________________________________________________________________________________
l 2x4-2x16 mm²
_________________________________________________________________________________________________________
m ∅ 18
mm
_________________________________________________________________________________________________________
Attention
Do only crimp copper and aluminium conducting material or special
connecting material mentioned in table 2.
If other conducting materials have to be crimped, please contact the manufacturer.
Attention
Do not use on live electrical circuits.
Before starting to crimp please make sure that all parts involved in the crimping process
are not energised.
Tubular cable lugs for fine-stranded conductors
C-clamps
Pre-insulated tubular cable lugs and connectors,
insulated pin cable lugs
Cable end-sleeves
Twin cable end-sleeves
Cutting die
Tubular cable lugs for fine-stranded conductors
C-clamps
Pre-insulated tubular cable lugs and connectors,
insulated pin cable lugs
Cable end-sleeves
Twin cable end-sleeves
Cutting die
page 13
page 13