Jet JWL-1015 Assembly Instructions And Parts List

Stand for JWL-1015/1015VS Lathes
Read and understand the
entire owner's manual that accompanied your
JWL-1015 lathe before attempting assembly or
operation of accessories.
Inspect contents for shipping damage. Report any
damage or part shortages to your distributor. Do
not discard shipping materials until accessory is set
up and functioning properly.
Shipping contents
1 Cross bar
2 Legs
2 Brackets
4 Tube caps
4 Levelers with hex nut
1 Hardware package, includes:
4 Socket head cap screws, 5/16x3/4
4 Lock washers, 5/16
4 Flat washers, 5/16
8 Socket head cap screws, M8x80
12 Flat washers, 8mm
4 Hex nuts, M8
Tools required for assembly
6mm hex key ("Allen wrench")
Open-end wrenches, 13mm (1/2"); 14mm (9/16")
Assembly
Refer to exploded view on reverse side for parts
clarification. Bracketed numbers refer to index
numbers in exploded view.
1. Install two levelers [5] into bottom of each leg.
Levelers can be adjusted for height and
leveling of lathe. Tighten hex nut against leg to
secure setting.
2. Install cross bar [4] at bottom of legs with
screws and washers [7/8]. Make screws snug
but do not fully tighten yet.
JET
427 New Sanford Road
LaVergne, Tennessee 37086
Ph.: 800-274-6848
www.jettools.com
Assembly Instructions and Parts List
Stock No. 719102A
3. Mount a bracket [1] to each leg with screws,
washers, and
brackets should face toward each other.
Multiple holes allow adjustment of lathe height.
Make nuts snug but do not fully tighten yet.
4. Place lathe onto stand brackets, and secure
with screws and washers [10/11/12]. Insert all
four screws first, then tighten each securely.
5. Fully tighten all screws and nuts in cross bar
[4] and brackets [1].
Specifications
Stock no. 719102A
Assembled dimensions (WxDxH, approx.):
26-3/4 x 23 x 31-1/2 in. (680 x 584 x 800 mm)
Shipping dimensions (WxDxH, approx.)
31.9 x 28 x 8.7 in. (810 x 710 x 220 mm)
Net weight (approx.): 17 kg (37.5 lbs)
Shipping weight (approx.): 20.5 kg (45.1 lbs)
Copyright © 2017 JET, a Division of JPW Industries, Inc.
nuts [7/8/9]. Gussets
Manual No. M-719102A
Edition 2 11/2018
on