Display And User Interface - Progressive Dynamics PD1200 Series Installation And Operation Manual

Display Interface
Display Panel
Figure 16
Inverter Display Location
Display Features

Power Button: Press to turn on; hold to turn off

Select Button: Cycles between display states:
Input Voltage, Output Voltage, Output
Power, Sleep, Error Code (if applicable)

Power Indicator: Lights up green when the inverter is on

Fault Indicator: Flashes red when an error has occurred

Shore Indicator: Lights up yellow when AC input is detected

Low Bat Warning Indicator: Lights up red when the battery
is nearing the end of its charge

Sleep: Lights automatically dim after 30 seconds

Remote port for externally mounted display
Rear Remote Connection
Figure 18
Remote Display (optional)
NOTE: Remote display operates exactly the same as the dis-
play mounted to the inverter
Select Button Display
Figure 17
Error Code Condition
Low battery volt-
age detected
E-1
High battery volt-
E-2 age shutdown
AC output over-
E-3 load shutdown
Over-temperature
shutdown
E-4
Internal Error
E-5
Figure 19
NOTE: For all error codes consult page 16 in the Installation and Opera-
tion Guide for troubleshooting methods
Low Bat Warning Indicator Power Indicator
Figure 20
Power Button Remote Display Port
Display Panel
ERROR CODES
Description
Input voltage has dropped beneath 10.5V for
several seconds. The PD1200 Series inverter
will automatically restart when the input
voltage reaches 12.0V.
Input voltage has surpassed 15.5V. The
PD1200 Series inverter will automatically
restart when the input voltage falls below
15.0V.
Output power has surpassed the continuous
power limit or the peak power limit. The
PD1200 Series inverter will not automati-
cally restart. A manual restart is necessary .
Internal temperature of the inverter has ex-
ceeded its safe operating limit. The PD1200
Series inverter will automatically restart
when internal temperatures return to safe
operating conditions.
An internal error has been detected. The
PD1200 Series inverter will not automati-
cally restart. A manual restart is necessary .
Error Code Descriptions
Fault Indicator
Display Indicators
13
Shore Power Indicator