Progressive Dynamics PD1200 Series Installation And Operation Manual page 9

Mounting Instructions
Mounting Instructions
1. Remove the PD1200 series inverter from its packaging, verify that all components are present, and record the inverter serial number in
the quick reference guide contained within.
2. Select an appropriate mounting location and orientation (See Page 8 for additional details regarding acceptable installation practices).
3. Use the inverter as a drill guide by placing it flush against the mounting surface and marking the appropriate hole locations in the
mounting surface (see Figure 4). Horizontal mounting of the PD1200 series inverter is recommended (see Figure 3), although it can be
mounted in a vertical position that provides unobstructed ventilation to the fan and vent holes.
4. If mounting vertically, mount the PD1200 series inverter so that the DC wiring compartment is facing up (see Figure 6). This will en-
sure that the display will be oriented correctly. It is best to ensure that PD1200 series inverter is placed in an area that keeps dust & de-
bris from entering the fan area. Debris may cause unexpected performance issues in your inverter.
5. Pilot-drill the mounting holes in the marked locations.
6. Secure the PD1200 Series Inverter firmly to the mounting surface using standard fasteners.
Figure 6
Vertical Mounting Configuration
Figure 7
Horizontal Mounting Configuration
Debris Shield (recommended)
DC Access Panel
WARNING: FIRE, SHOCK, AND ENERGY HAZARD
Inverter should only be installed by an electrician or a certified RV
technician.
Inverter is NOT ignition protected. Do not mount in the LP gas or bat-
tery compartments
Inverter should be mounted in a dry, well ventilated space with ade-
quate air flow
Failure to follow these instructions may result in serious injury or
death. Failure to follow these instructions may also damage the unit
and/or equipment.
Figure 8
Inverter Mounting Hole Pattern
9