Progressive Dynamics PD1200 Series Installation And Operation Manual page 4

Introduction
1
Figure 2
PD1200 Series Inverter (DC End View)
7 8
Figure 4
PD1200 Series Inverter (Side View)
Descriptions
1 DC Input Port (negative):
2 Ventilation Input:
3 DC Input Port (positive):
4 AC Input Knockout:
5 GFCI Output (optional):
6 AC Output Knockout:
7 AC Access Panel:
8 15A Output Circuit Breaker:
inverter is supplying power, internal circuitry limits output power to specified limits.
9 DC Access Panel:
10 Equipment Ground Lug:
11 On-Board Display:
2
Used to connect to battery (-)
Ensure ventilation input is not blocked for proper operation
Used to connect to battery (+)
Knockout to be removed when connecting transfer switch to external AC power
Optional AC Output selected at time of purchase. Not field removable
Knockout to be removed when connecting to hardwired AC Output
Remove access panel to wire install AC wiring
Protects equipment from excessive power draw when connected to AC Input Power. When
Remove access panel to wire install DC wiring
Connect case to earth ground to ensure proper, safe operation
Display monitors all relevant parameters of the PD1200 Series Inverter
3 4
Figure 3
9 10 11
Figure 5
5
PD1200 Series Inverter (AC End View)
PD1200 Series Inverter (Isometric View)
4
6