Browser Connection; System Requirements; Establishing The Connection; Password Protection In Camera - Sony SNC-HMX70 User Manual

Browser connection

A computer with Microsoft Internet Explorer is used to
receive live images, control the unit, and replay stored
sequences. The unit is configured over the network
using the browser.

System requirements

Our minimum recommendations are:
– Computer with Dual core HyperThreading processor
or better
– 4K capable graphic card
– Windows 7 or later operating system
– Network access
– Internet Explorer version 11 or later
Note
To see live images in your browser it might be necessary
to download and install the MPEG-ActiveX from the
Bosch download site.
Establishing the
connection
The unit must have a valid IP address to operate on your
network and a compatible subnet mask. By default,
DHCP is preset at the factory to On and so your DHCP
server assigns an IP address. With no DHCP server the
default address is 192.168.0.1
1
Start the Web browser.
2
Enter the IP address of the unit as the URL.
The live viewer is displayed.
3
During initial installation, confirm any security
questions that appear.
Note
If you cannot connect, the unit may have reached its
maximum number of connections. Depending on the
device and network configuration.

Password protection in camera

A unit offers the option of limiting access across various
authorization levels. If the unit is password-protected, a
message to enter the password appears.
1
Enter the user name and the associated password in
the appropriate fields.
2
Click OK. If the password is correct, the desired
page is displayed.
3