– The Picture quality slider allows adjustment of the
M-JPEG image quality from Low to High.
Note
The M-JPEG frame rate can vary depending on system
loading.
Encoder Statistics
Details of the Encoder Statistics are displayed here for
information.
Encoder Regions
Encoder regions are used to increase or decrease the
encoding quality for selectable areas of the image. They
can be used to give better control of the bitrate by
enhancing the encoding quality of important regions
(objects) and decreasing the encoding quality of less
important regions (background).
Eight encoder regions can be defined:
1
Select one of the eight available regions from the
drop-down box.
2
Click the + box to add an area.
3
Use the mouse to define the area covered by the
region.
– Drag the center, corner points, or sides of the
shaded area.
– Double-click on a side to add additional points to
the area.
4
Select the encoder quality to be used for the defined
area. (Object and background quality levels are
defined in the Expert Settings section of the
Encoder Profile page.)
5
If required, select another region and repeat the
steps.
6
To remove a region, select the area and click the
waste bin icon.
7
Click Set to apply the region settings.
21