System Overview; Live Page; Playback; Configuration - Sony SNC-EMX30R User Manual

52 en | System overview
2

System overview

When a connection is established, the Live page is initially shown.
The application bar shows these icons:
2.1

Live page

The Live page is used to display the live video stream and control the unit.
2.2

Playback

The Playback page is used for playing back recorded sequences.
2.3

Configuration

The Configuration page is used to configure the unit and the application interface.
Making Changes
Each configuration screen shows the current settings. You can change the settings by entering
new values or by selecting a predefined value from a list field.
Not every page has a Set button. Changes to pages without a Set button are set immediately.
If a page does show a Set button, you must click the Set button for a change to take effect.
Notice!
Save each change with the associated Set button.
Clicking the Set button saves the settings only in the current field. Changes in any other fields
are ignored.
Some changes only take effect after the unit is rebooted. In this case, the Set button changes
to Set and Reboot.
1.
2.
2019-07 | V01 | DOC
Live
Playback
Configuration
Dashboard
Make the desired changes.
Click the Set and Reboot button. The camera reboots and the changed settings are
activated.
To view the live video stream, click this icon.
To play back recorded sequences, click this
icon.
This link is only visible if a storage medium
has been configured for recording. (With VRM
recording this option is not active.)
To configure the unit, click this icon.
To see detailed system information, click this
icon.
To get context sensitive help for a particular
page, click this icon.
User manual
Network camera
Sony Corporation