Audio; Pixel Counter - Sony SNC-HMX70 User Manual

Audio

You can set the gain of the audio signals to suit your
specific requirements. The live video image is shown in
the window to help you check the audio source. Your
changes are effective immediately.
If you connect via Web browser, you must activate the
audio transmission on the LIVE Functions page. For
other connections, the transmission depends on the
audio settings of the respective system.
The audio signals are sent in a separate data stream
parallel to the video data, and so increase the network
load. The audio data is encoded according to the selected
format and requires additional bandwidth. If you do not
want any audio data to be transmitted, select Off.
Audio
Select the audio input from the drop-down list.
Input volume
Adjust the audio level with the slider(s). Adjust so that
the indicator does not go into the red zone.
Recording format
Select a format for audio recording. The default value is
AAC 48 kbps. You can select AAC 80 kbps, G.711 or
L16 depending on the required audio quality or
sampling rate.
AAC audio technology is licensed by Fraunhofer IIS.
(http://www.iis.fraunhofer.de/amm/)

Pixel Counter

The number of horizontal and vertical pixels covered by
the highlighted area is displayed below the picture. With
these values you can check whether the requirements for
specific functions, for example, identification tasks, are
fulfilled.
1
Click Freeze to freeze the camera image if the
object that you want to measure is moving.
2
To reposition a zone, place the cursor over the zone,
hold down the mouse button and drag into position.
3
To change the shape of a zone, place the cursor over
the edge of the zone, hold down the mouse button
and drag the edge of the zone to the required
position.
18