The Detector User Interface
Agilent InfinityLab LC Series 1260 Infinity II FLD User Manual
Using the Fluorescence Detector
The Detector User Interface
Within the detector GUI, there are active areas. If you move
the mouse cursor across the icons the cursor will change.
1
Lamp: turn on and off of UV-lamp
2
EMF status
3
Detector status
4
Lamp status (on/off)
EMF Status shows Run / Ready / Error state and "Not
Ready text" or "Error text"
• Offline (gray)
• Ok. No Maintenance required (green)
• EMF warning. Maintenance might be required (yellow)
• EMF warning. Maintenance required (red)
Important: The EMF settings can be accessed via Agilent
Lab Advisor. The limit(s) can be changed. Based on the
limit, the User Interface displays the above status.
3
61