SAFETY WARNING Disconnect the unit from the power supply before opening and servicing For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback.
Page 2
USB port. The POWER LED lights and the STATUS LED flashes three times. Although 617T can be powered via pin #18 on the HDMI interface, we recommend that you use the USB power adapter. 617R can only be powered via the USB power adapter.
Connect the two LC optical fibers between 617T and 617R. Connect (A) to (A) and (B) to (B). Make sure that the duplex connectors are connected properly. The STATUS LED flashes. Do not look directly into the LC connectors on the...
Micro USB (for power supply) 617R (display end) Micro USB (for power supply) Power Via USB source Via external source From HDMI PIN #18 (617T only) Consumption <2.5W Recommended Structure Dual Multi-mode OM3 (50/125um) glass fiber Cable Optical Connectors Duplex LC connectors Max.