Led Diagnostics; Terminal Identification - Altronix LPS3 Installation Instructions Manual

AC DC
ALTRONIX CORP. "LPS3 POWER SUPPLY"

LED Diagnostics:

Red (DC) Green (AC)
ON ON
ON OFF
OFF ON
OFF OFF

Terminal Identification:

Terminal Function/Description
Legend
AC/ AC Low voltage AC input (see voltage output/transformer selection table).
For 12VDC output use 16VAC with 56VA power rating or higher.
For 24VDC output use 28VAC with 85VA power rating or higher.
- DC + 12-24VDC @ 2.5 amps continuous power limited output.
+ BAT - Stand-by battery connections. Maximum charge rate 350mA.
Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.
Altronix Corp.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056
web site: www.altronix.com, e-mail: info@altronix.com, Lifetime Warranty, Made in U.S.A.
12V Closed
24V Open
Power Supply Status
Normal operating condition
Loss of AC, Stand-by battery supplying power
No DC output. Short circuit or thermal overload condition
or defective unit.
No DC output. Loss of AC. Discharged or no battery present.
M E M B E R