Operating Elements & Connections; Model Xkb-208A/210A - Omnitronic XKB Series User Manual

4
OPERATING ELEMENTS & CONNECTIONS

Model XKB-208A/210A

This user manual describes the rear panel of model XKB-210A as a reference. Illustrations and features of
model XKB-208A are comparable.
No. Function
1 CH 1 level control
To mix the signal of channel 1 to the
master signal.
2 Mic/line input CH 1
Combo input (XLR/6.3 mm jack) for
connecting microphones or audio units
with line level output (e.g. mixer, CD
player, music instrument). Adjust the
input level with the MIC/LINE selector
switch: LINE = for audio units with line
output (e.g. CD player or instrument),
MIC = for microphones.
3 MIX OUT jack
XLR output of the master signal of all
channels for connection to a line input of
a further active speaker or to a mixer or
amplifier.
4 CH 2 level control
To mix the signal of channel 2 to the
master signal.
5 CH 2 line inputs
Combo input (XLR/6.3 mm jack) and
RCA jacks for connecting audio units
with line level output (e.g. CD players).
6 Bluetooth button
To enter pairing mode or to reset a
Bluetooth connection shortly press this
button.
7 Status indicators
SIGNAL: input signal is present
POWER: speaker is powered on
LIMIT: the signal level is too high; the
limiter will reduce the signal level to
protect the speakers. Reduce the
volume with the master control until the
LED does not light anymore, or only at
signal peaks.
8 Power switch
Turns the device on and off.
9 Power supply
Used to plug in the supplied power cord.
10 Fuse
Only replace the fuse when the device is
disconnected from mains. Only use
fuses of the same rating and power. The
correct fuse value is specified on the
rear panel.
25