Special Features; Factory Reset - Universal Flow Monitors FlowStream OFS User Manual

SPECIAL FEATURES

Factory Reset

This feature is provided to override all user-configurable parameters, and replacing them with
the original factory settings. It is a useful tool if the user is unsure how he/she has programmed
some of the parameters.
To enter the Factory Reset mode:
1. Remove power from the unit.
2. Press A2 and hold.
3. Turn the power back on. Continue holding A2 until "FACt rSEt" is displayed, followed
by 4 sets of horizontal bars. This will take approximately 10 seconds. Then release A2.
4. The unit will then reset itself and start in RUN mode
FSMAN.6 081214
Press and hold before applying
power, then turn the power on
Continue holding until
all digits are completed
Page 36