Temperature - Universal Flow Monitors FlowStream OFS User Manual

Temperature

Available with:
Not Available with:
1. Press A2 until "t" is displayed, then release A2.
Temperature
mode indicator
Note 1: Temperature is displayed in degrees Fahrenheit. There is no output signal for
temperature.
Note 2: Alarm 2 LED flashes to indicate that the LCD readout corresponds to gas
temperature, as well as "F" which is shown after the temperature reading.
FSMAN.6 081214
All models in Low-
Speed mode
High-Speed mode
Press until "t" is
displayed, then release
Page 19