Table of Contents
Advertisement
Sleep timer
Your clock radio can be set to turn off after a preset time has
elapsed.
The sleep setting can be adjusted between 10 and 90 minutes.
Ensure your clock radio switched on.
1. To set the desired sleep time, press and hold the Sleep timer
button to enter the setting menu.
2. Repeatedly press the Tuning up/down button to select the
desired sleep time.
Press the Select button to confirm the
setting. Use the "Off" option to cancel the sleep function. An
active sleep timer is shown using a symbol "S" on the playing
display.
Your clock will switch off after the preset time has
elapsed.
3.
To cancel the sleep timer before the preset time has elapsed
and to turn off the radio, press and hold the Power button to
turn the unit off manually. To cancel the sleep timer and leave
the radio playing, go back to the sleep timer settings (step 1 to 2)
and select the "Off" option in step 2.
4. To view the remaining time of an active sleep timer on the
display, press and hold the
Software version
The software display cannot be altered and is just for your
reference.
1. To view the software version on the display press and hold the
Menu button to enter the menu.
2. Repeatedly press the Tuning Up/Down button until "SW
Version" appears on the display.
3. Press the Select button and the software version will appear on
the display.
4. Press and release any button to exit the software version
display.
Sleep timer
button.
System reset
If your radio fails to operate correctly, or some digits on the display
are missing or incomplete carry out the following procedure.
1. Press and hold the Power button to switch on your radio.
2. Press and hold the Menu button to access the menu for the
current mode.
3. Repeatedly press the Tuning Up/Down button until the display
shows "Factory Reset" and press the Select button to enter the
setting.
4.
Press the Tuning Up/Down button to select "Yes" or "No". If you
do not wish to carry out a system reset, select "No" and then
press the
Select button
to confirm the setting.
5. With "Yes" selected, press the
be performed. All presets and station lists will be erased. All
settings will be set to their default values. After a system reset,
the radio will be restarted. The display will show "Welcome to
Digital Radio" and a scan of the DAB band III will be performed.
In case of malfunction due to electrostatic discharge, reset the
product (reconnection of power source may be required) to
resume normal operation.
Select
button. A full reset will
GB
16
Hide quick links:
Advertisement
Table of Contents
