Lock Switch; Selecting A Station - Dab; Operating Your Radio - Dab; Secondary Services - Dab - Sangean Pocket 640 User Manual

Lock switch

The lock switch is used to prevent unintentional operation of your
radio.
1. Set the Lock switch located on the side of your radio to the
"Lock" position and the power and all other buttons will be
disabled.
This will prevent accidental operation when your radio is
packed in a suitcase or travel bag.
2. To release the lock, slide the Lock switch down to the "Unlock"
position.
IMPORTANT:
'Key Locked' will show on the display if pressing the buttons when
the radio is locked. The radio will not be able to be turned on if
locking the radio when it's in power off mode.
Operating your radio – DAB
1. Carefully extend the telescopic aerial.
2. Press and hold the Power button to switch on your radio. The
display will show "Welcome to Digital Radio" briefly.
3. If this is the first time the radio is used, a quick scan of the
Band III DAB channels will be carried out. If the radio has been
used before the last used station will be selected.
4. During the scanning process, as new stations are detected,
the station counter on the right hand side of the display will
increase and stations will be added to the list. The lower line of
the display shows a bar-graph indicating progress of autotune.
5. When the scanning is complete the first station (in numeric
alpha order 0...9...A....Z) will be selected.
6. If the station list is still empty after the scan your radio will
display "No DAB station".
7. If no signals are found it may be necessary to relocate your
radio to a position giving better reception.
7
Selecting a station –DAB
1. The top line of the display shows the name of the station
currently selected.
2. Press the Tuning Up/Down buttons to scroll through the list of
available stations.
3. Press and release the Select button to select the station. The
display may show "Now tuning..." while your radio finds the
station.
4. Adjust the Volume control to the required setting.
Note:
If after selecting a station the display shows "Service not available"
it may be necessary to relocate your radio to a position giving
better reception.
Secondary services – DAB
1. Certain radio stations have one or more secondary services
associated with them. If a station has a secondary service
associated with it the display will show ">>" next to the station
name on the station list. The secondary service will then appear
immediately after the primary service as you press the Tuning
Up button.
2. Press the Select button to select the station.