Station Order - Dab; Operating Your Radio - Fm - Sangean Pocket 640 User Manual

Station order – DAB
Your radio has 3 station order settings from which you can
choose.
The station order settings are name, ensemble and active.
Note: The default station order on your radio is name.
1. When in DAB mode, press and hold the Menu button to enter
the DAB menu setting.
2. Press the Tuning up/down button until 'Station Order' appears
on the display. Press the Select button to enter the setting.
3. Press the Tuning up/down button
setting is displayed.
4. Choose between name, active and ensemble.
'Name' - sorts the station list alpha-numerically 0...9 A...Z.
'Active' - shows only those stations for which a signal can be
found.
'Ensemble' - organises the station list by DAB multiplex.
The current setting is indicated by an asterisk.
5. Press the Select button to enter the setting.
until the required station order
Operating your radio – FM
1. Carefully extend the telescopic aerial.
2. Press and hold the Power button to switch on your radio.
3. Press the Band button to select the FM band.
4. Press and release the Select button until the display shows
"Auto tune".
5. Press the Tuning Up button. Your radio will scan from the
currently displayed frequency in direction upwards and will stop
scanning when it finds a station of sufficient strength.
To scan down in frequency, press the Tuning Down button.
Your radio will scan in a downwards direction (high frequency to
low frequency) and stop automatically when it finds a station of
sufficient strength.
6. The display will show the frequency of the signal which has
been found. If RDS information is available, after a few seconds
the display will show the radio station name.
7. When the end of the waveband is reached, your radio will
recommence tuning from the opposite end of the waveband.
8. Adjust the Volume control to the required setting.
9. To switch off your radio press and hold the Power button.
GB
10