Table of Contents
Advertisement
SATO CX Series Printer
Command Structure
<ESC>CFa
a:
Example:
Placement:
Default:
Command Function
To adjust the label sensor for unique media and ribbon com-
binations.
Input to Printer
<ESC>A
<ESC>CF1
<ESC>Z
Printer Output
There is no printer output for this command. It will cause the
printer to feed a label while the characteristics of the label
backing or eye-mark are measured.
Special Notes
1. Available from printer firmware revision P2.08.
96
Auto Calibration
Auto Calibration
Auto Calibration
Auto Calibration
0 = Disabled
1 = Enabled
<ESC>CF1
This command needs to be in its own data st-
ream.
There is no default for this command.
Hide quick links:
Advertisement
Table of Contents
