Continuous Forms Printing - SATO CX Series Programming Manual

SATO CX Series Printer

Continuous Forms Printing

Continuous Forms Printing
Continuous Forms Printing Continuous Forms Printing
Command Structure
None
The printer locates the end of an adhesive label by sensing
the backing between labels or through the use of an Eye-
Mark (black rectangle on the reverse side of the backing). It
locates the end of a tag from a notch, eye-mark, or a hole
between tags. Both sensors should be disabled when printing
continuous forms by sending the <ESC>CI0 command to
disable the sensor, (See page 105).
If you will be using continuous labels or tags, the printer must
be told to stop feeding in another manner. The length is de-
termined by the position of the last printed image on the label
or tag. The printer will stop feeding when this last field is fi-
nished printing. The length may be increased with printed
spaces (20 hexadecimal) if necessary. There is no command
code to control label length.
28