Print Test Label - SATO CX Series Programming Manual

SATO CX Series Printer
Command Structure
<ESC>CT
Example:
Placement:
Default:
Command Function
To print a test label
Input to Printer
<ESC>A
<ESC>CT
<ESC>Z
Printer Output
Special Notes
1. When the printer finishes printing the Test Label, it is in
102

Print Test Label

Print Test Label
Print Test Label Print Test Label
<ESC>CT
This command should be sent in a separate
data stream
There is no default for this command.
the hexadecimal print mode. This mode is used for dia-
gnostic troubleshooting. To switch back to normal mode,
disconnect power source.